"How to run car with water DIY Plan Guide"
How to run car with tap water - H2O Fuel Generator Guide - DIY Plan
Detailed guide with step by step instrcutions on how to install H2O fuel system and run your car on water. Hydrogen fuel generator H2O Energy. Run car using tap water, save $$$$.
Detailed guide with step by step instrcutions on how to install system and run your car on water. Hydrogen fuel generator H2O Energy. Run car using tap water.
If I told you your car could run on tap water, you would probably call me crazy, however that is exactly what I am about to tell you (sorta). Got your attention? Now for the whole amazing story:
 STOP Spending $1,200 or More Every Year on WASTED Fuel.
STOP Emitting Heat and Pollution into The Air You Breathe...  START Enjoying a Smooth, Quiet Ride & Longer Engine Life!
START a Stealth Attack on Crazy Gas Prices And even EARN
EXTRA INCOME at Home! The Water Car - Is it Ever Possible? |
People see cars as ultimate necessities. Who would not wish for his own car when in fact it is really hard to commute on a day to day basis? However, because of the escalating demand for cars, the price of gas which is very much significant to fuel these vehicles also rises. Are you not getting tired of the continuous changes in the cost of gas? More so, a recent innovation called water energy has been found out to bear the capacity of making cars operate. Yes, you got it right! You can run your car on water!
Is it unbelievable? The media has been quite attentive to this discovery as several video clips and news bits have been aired by numerous television channels, broadsheets have printed out the news, and the radio networks have likewise highlighted it and yet, the people remain a bit skeptical about its truth. Accept it. Water energy can thus be possibly generated.
Cars run when there is an energy supplied to its overall system. Moreover, the society has been accustomed to using fossil fuel to energize these vehicles. On the other hand, water is most popularly known by the term "hydro-power". China had already introduced its hydro-powered generator in the past years and it had been widely accepted by the public. Needless to say, it is high time that all and sundry must realize the truth to the usefulness of water in running a car.
A group of scientists had concerted their efforts of unearthing the possibility of generating water fuel and luckily, their efforts had paid off after a span of twenty years. They uncovered that with the use of the so called electrolysis, water can thus be transformed into a flammable gas that is known as Oxyhydrogen. Surprisingly, cars can utilize water energy in its general function with the electrolysis method applied to the battery and engine.
Here are some insights that would convince you that you can indeed make your car run with the use of water.
First and foremost, its possibility can never be questioned since water itself is a molecule thereby its element components may be rearranged through the employment of electricity. Hence, the electricity present in the car battery will be used to rearrange the molecule of water and convert it to Brown's gas or Oxyhydrogen.
Then, if you try to look deeper into the application of the so called Oxyhydrogen, you will find out that your car's engine can definitely produce a flammable gas out of water. Furthermore, you will have to bear such a low cost.
Lastly, Oxyhydrogen is nowadays used in several applications and industrial fields such as in cutting glass and in welding metals. Thus, water energy can surely make a car move.
The great part is that it is not difficult to convert your car into a water powered vehicle. You can do it yourself in some easy steps. You will be taken by the hand and walked through the whole process step by step in this amazing guide.
Overall, today's technology has gone a long way. Who would ever imagine that this thing can be made possible? Certainly not those who lived in the primitive age! But, you are enveloped in such a modern world so believe it or not, you can run your car on water! Run Your Car On Tap Water! |
IT ALSO WORKS ON YOUR
TRUCK / RV / MOTORCYCLE (ETC)
Build and install a low-cost, pollution free, alternative method for running your vehicle (internal combustion) engine on TAP WATER. This efficient system converts ordinary tap water into gaseous Hydrogen and Oxygen, and then burns these vapors in the engine in place of gasoline.
This 'minisystem' runs easily from your existing battery and electrical system, and plugs into your carburetor with simple off-the-shelf components.
Do-it-yourself plans come complete with diagrams and schematics for easy construction and installation. 
Convert Your Car TODAY to Run on Water and gas to save over 40% on fuel costs!
Would you like to find out how to run your vehicle on water and stop wasting money on gas? This do-it-yourself conversion guide is very affordable and EASY with step-by-step instructions. The conversion WILL NOT void your warranty because it is 100% reversible! It's easy to install and remove. Convert Your Car On Water |
Did you know that you can convert your car to a water-burning car? You can run your car on water, supplemental to gasoline, to increase your car's fuel efficiency and reduce your fuel costs significantly.  Works on gas or diesel powered cars, vans, trucks, and SUVs. (Not tested on hybrids)
Your car will become at least 40% more fuel efficient and produce cleaner emissions. Convert your car for the lowest price. Similar conversion kits cost up to $600 and up! Works with plain tap water. No need for distilled water or special water additives! We've simplified the process. The steps are easy, and the materials are affordable.
Do-it-yourself plans allow the individual (that's you and me, folks) to make a difference. This is the easiest and lowest-cost way to convert your car to run on (relatively) free energy.
Our easy conversion guide will show you how to use electricity from your car's battery to separate water into a gas called HHO (2 Hydrogen + 1 Oxygen). HHO, also called
Brown's Gas or Hydroxy, burns smoothly and provides significant energy - while the end product is just H2O! HHO provides the atomic power of Hydrogen, while maintaining the
stability of water. Now, with existing technology, anyone can stand up and make a difference by reducing the local automotive pollution, eliminate gasoline expenses, help restore our atmosphere, and breathe a little easier. Can Water Really Power a Car? |
The answer is YES, ABSOLUTELY! We have made the technology to build a water-burning hybrid easy and affordable. Watch This Video to See Similar Technology in Action! Experts Agree: Water is Viable Fuel Technology
Technology In Action
Water can be used to fuel a car when used as a supplement to gasoline. In fact, very little water is needed! only one quart of water provides over 1800 gallons of HHO gas which can literally last for months and significantly increase your vehicle's fuel efficiently, improve emissions quality, and save you money. Thousands of successful water-conversions around the world are proof that this technology works and will soon catch on! Some industry insiders say its just a matter of time before this water-burning technology will be standard in new automobiles. One expert estimates most cars will be using this technology by 2012, but until the auto manufacturers catch up, you can use this technology for yourself today at a very reasonable set-up cost.
The conversion guide is on sale today and all of the raw materials cost less than $150 and are easy to find at your local hardware and auto-parts stores. Once you get the conversion set-up, you can even start converting your friends' and family's cars and help them spend less money on gas. The guide includes detailed instructions that are very easy to follow and offer the best value and performance available anywhere. In fact, we received a testimonial from a customer in California who is advertising his conversion services on Craigslist after learning how to do the conversion using this easy-to-follow guide. (John - you can consider this free advertising!) We encourage you to help other people set-up their own conversions with our information! After all, The more cars we can get running on less fuel, the better for our environment.
How Does The System Works? |
Exceedingly simple. Water is pumped as needed to replenish and maintain the liquid level in the chamber. The electrodes are vibrated with a 0.5-5A electrical pulse which breaks 2(H2O) => 2H2 + O2. When the pressure reaches say 30-60 psi, you turn the key and go. You step on the pedal, you send more energy to the electrodes, and thus more vapor to the cylinders; i.e. fuel vapor on demand. You set the idle max-flow rate to get the most efficient use of power, and you're off to the races. In the big picture, your free energy is coming from the tap water in an open system, as the latent energy in the water is enough to power the engine and hence drive the alternator and whatever belt-driven accessories. And the alternator is efficient enough to run the various electrical loads (10 - 20 amps), including the additional low current to run this vapor reaction. No extra batteries are required.
STOP Spending $1,200 or More Every Year on WASTED Fuel STOP Emitting Heat and Pollution into The Air You Breathe. START Enjoying a Smooth, Quiet Ride & Longer Engine Life! START a Stealth Attack on Crazy Gas Prices And even EARN
EXTRA INCOME at Home! 
How To Build & Install The System? |
Build and install a low-cost alternative method for running your vehicle (internal combustion engine) on tap water, using off-the-shelf components. This is simply an efficient way to convert ordinary tap water into gaseous hydrogen and oxygen, and then burn these vapors in the engine, instead of gasoline. This "minisystem" runs easily from your existing battery and electrical system, and it plugs into your carburetor with simple off-the-shelf fittings. You will be installing a plastic water tank, a control circuit, a reaction chamber, a hi-pressure carb/FI fitting, and 3 gauges, and then hooking into your existing carb/FI. The simplicity comes from its being an "on-demand" system requiring no fancy storage or plumbing. You crank the gas pedal or throttle, and you electrically create more vapor for immediate consumption, on demand; low-high flow rate as needed, from idle to maximum power. The only real change is that you are using tap water as fuel, instead of the traditional petroleum-based fuel.
The process is very safe because the combustible gas is extracted as needed and burned steadily from the water, unlike larger volumes of pure hydrogen which are highly flammable. WHY COMPRESS HYDROGEN IN DANGEROUS HIGH-PRESSURE TANKS WHEN IT IS ALREADY "COMPRESSED" IN PLAIN WATER - AND CAN BE EASILY AND SAFELY RELEASED??! Our set-up produces hydrogen as your car needs it, rather than using storage tanks. Thousands of cars have been safely converted without any issues or incidents. Best of all, this conversion process is completely reversible so it will not void your auto manufacturers warranty. It simply acts as an add-on to significantly increase your fuel efficiency.
Frequently Asked Questions! |
Q: Does it really work ?
A: Yes; this is well-established technology dating back to stainless steel. But be sure to follow the instructions in the guide using the proper mechanical and electrical assembly techniques, as this plan incorporates the best qualities of several techniques. Q: How does it qualify as "free energy"?
A: If you're paying someone for the water you use, then it is not strictly free. But the alternative is to keep buying into expensive gasoline and its resultant hydrocarbon pollution. Q: Is it safe?
A: Technically, it is safer than running on fossil fuel because you are no longer choking on your own emissions (health-wise). In general, it is practically as safe as your current gasoline arrangement. You will be installing a few simple safety devices, using current automotive standards. Q: What kind of performance can I expect?
A: Properly adjusted, your modified vapor-only fuel system will run cooler, and at a modestly higher power level. The mileage performance expected from this design ranges from 50-300 mpg (of water), depending on your adjusting skills. Q: Can I do the modification myself?
A: Why not? If you don't have any mechanical skills, and you know someone with basic mechanical and/or electrical skills, you can even delegate some of the construction. If you are using a fuel-injected engine, you may have to get a mechanic's opinion. [There will have to be an adapter inserted into the fuel-injection system, just as you would have to do if you were going to run on propane, hydrogen, or natural gas. Ed.) Q: What is the environmental impact that my vehicle will have?
A: It will be producing H20 steam (water vapor) and unburn O2 (Oxygen). Hence, it will be cleaning the environment, rather than dumping nauseous toxins into it. Plus you will be helping to save our dwindling supply of atmospheric oxygen. Any excess vapor in the reaction becomes either steam or oxygen. You can also expect to be receiving more than casual interest from those around you. Q: Isn’t this really a steam engine?
A: No. Really. Exceedingly high temperature and pressure are not used. This is strictly an internal-combustion engine (burning orthohydrogen) with residual steam in the exhaust as a by-product.
Plus A Bunch Of Bonuces.. |
You don't just get the Do-It-Yourself guide You will also get the following bonuses Bonus #1: How To Maximize Your Tax Write-Off 
LET THE IRS PAY FOR YOUR CAR/TRUCK UPGRADE!
You will learn how to get your water car costs back from the IRS - as you deserve. Why do you deserve to get your money back? For your pretty eyes? No. Because by driving a "green" car - or even more so for a green truck or fleet of trucks - you'll be actually HELPING NATIONAL ECONOMY by reducing our costs on pollution, hospitals, sick days, and national debt for imported oil - not to mention the painful price of economic dependability!
Since 2005 the American IRS could not ignore alternative fuel anymore, and started giving considerable rewards for "green" vehicles, green fuels and green upgrades. We will teach you how to maximize your rewards.
Bonus #2: Car Buying Tips
If you are even mildly interested in buying a car, do not step onto the mine field without a training manual. This guide will help you to
Know your reason for buying a car
Different sources for buying a car
Tips about Financing
What should you look for in a used car
What you should know before you sign a contract
Common dealership scams
Avoiding auto refinancing scams
What to look for in a road test
Where to investigate and compare prices
Do not buy a flood damaged car
Buying a car online
Vehicle auctions - a good place to shop?
What you should know about auto service contracts
On the alert for "gas saving" claims
Understanding warrantees
All this and much more is waiting for you in “Car Buying Tips”. A simple title packed full of great information you can’t afford to be without.
Bonus #3: Dealing With The Vehicle Computer
You will also receive a complete guide on how to deal with the computer in your car. It is the most important step to run your car on water. If you fail to build a module then you will not be able to adjust the computer of your car that will result in burning more fuel then water. Most e-Book Jockeys do not tell you that as they do not give you the plans to build the module. We include this detailed information in this guide.
Testimonials From Happy Customers! |
"The best"
2008/07/08 03:45 - Maxwell M.
This is by far the best Water Power device I have seen!" Everybody should have this technology!"
2008/07/08 01:48 - Peter P.
A friend installed this gizmo in my truck two months ago. After 30 seconds first start I noticed that the engine became soooo quiet. At first I thought the RPM went down because of the water, but no, the device has definitely changed the way my engine works - it does not ping anymore!
Another thing I noticed right away was that the absolutely terrible stink previously coming out of my exhaust has gone down dramatically."25% 77% 100% boost "
2008/07/08 01:35 - Tim D.
My 2007 Dodge 4.7 v8 Multi fuel got a 5 mile per gallon boost so far which is about 25%...Hope to see another 10% or more. Still tweaking the system.
Thanks
*********** A day later Jan.5,2008, Tim wrote again: ***********
Well I was wrong on the Mileage. At 40MPH I got 26.5 MPG which is 77% higher than the manufactures listed 15 MPG Sticker. Still tweaking the system and hope to break the 30 MPG barrier soon.
*********** On Jan.20,2008, Tim wrote again: ***********
Boosted my mileage to just over 100% from the rated 15 mpg to 30+ MPG and still tweaking. In addition that was with a single unit HHO 32 oz."Chevrolet 1979 Pickup Truck - from 7 MPG to 20 MPG - WOW!!!"
2008/07/08 01:33 - Gilbert B.
Hi
I have been experimenting, with my own , truck, 79 chev pu 4wd getting 7 mpg installed 2 hho went to 12 put on 6 went to 15 ??? i made some changes , i found some bigger ,jars i changed the design on the winding the coil , got 8 windings, changed a few other things , I have been a mech. all my life , i am up some , last test was around 20mpg as near as i can tell , speedo not exact , but a major change in running ,etc,"Landrover 1969 Diesel - 71.43 MPG!!!!"
2008/07/08 01:29 - Michael B.
Right then, I've got a 1969 Landrover Series 2a 2.25L Diesel. I put magnets on the fuel line and increased the mileage on a set 17 mile route at a steady 40mph to 27.87mpg. I then constructed the single cell system and fitted it. My first run was with the bubbler closed and on the set run increased my mileage to 28.84mpg. A positive start, but I felt that the engine was being starved of HHO. I then reduced the length of the two feed pipes going to the closest point on the air intake manifold to 4 feet each from five feet and opened up the bubbler to allow a moderate amount of air through. I then ran the same run (each run took 35 minutes) and compared the results. My 39 year old Landrover did 71.43mpg!!!!
In truth, I was hoping to achieve a modest 40mpg but this is unbelievable!!
Many thanks for all your help. Your the first people that haven't scoffed at me for attempting to run on HHO and I greatly appreciate your support.
Regards."20 Year Old Mitsubishi - Saves 18-20% & Feels like new after 1 hour of using Water4Gas!"
2008/06/10 05:29 - Thillai S.
Gooday, This sytem really works great, thanks to you. I managed to replicate an electrolyzer and it works well, it gives me about 18 to 20% fuel saving, that's great. I am using stainless steel grade 304 for both because i cant get grade 316L in Malaysia, i have spent most of the days looking for it but only 304 are vastly available. Anyway i have ordered 316 from Singapore.
The system is really great, i tried to an old Mitsubishi engine, a 20 year old car, after an hour drive i found out that the system has cleanse the combustion chamber and now that car sounds as good as brand new and it is very smooth.
I will keep you update.
Keep well
Thank you"40% higher mileage -Misubishi Pajero Turbo Diesel"
2008/05/23 07:27 - John S.
since fitting my 3 cell unit I'm really happy with the results... a 40% mileage increase with my 2.5 1992 Misubishi Pajero TD... and much better cold start, and smoother running.
The one thing I've noticed though, is that the cells do not heat up. They do warm up a little but nothing significant.
On Sale For a Limited Time! |
You won't find a better price anywhere else for such a complete and detailed instructions and full illustrations easy enough for even a novice to follow. This technology is used successfully by thousands of satisfied customers. Once installed, it will save you an average of $110 per month for many years into the future! So what are you waiting for? Start Saving Money Today!
| 
